3D Printing Artillery Sidewinder X1 3D Printer

PLA Temperature Test – Fourth Attempt = Continued Failure

This is my fourth attempt at what I considered to be a fantastic little ‘torture test’ for the Artillery Sidewinder X1 printer.

I realised I couldn’t solve this on my own so I sought help from a group on Facebook. Others kindly suggested different print settings and especially on the subject of retraction.

I applied these settings in Cura, sliced the file, modified the .GCode file to apply the temperature settings at the appropriate layers and transferred the file over to the printer.

Everything was looking fine initially and certainly much better than before until disaster happened once again.

I am beginning to wonder whether the machine is not capable of printing this very specific test.

The Facebook group I refer to:

Link to .GCode file:

Thank you for watching.

Rob @ 3DModUK

3D Printing Artillery Sidewinder X1 3D Printer Blender General

PLA Temperature Test – Second Attempt = Success (kind of)

In this second test using the ‘Temperature Tower’ I have adjusted my model to improve the simplicity of the test and removed the overhang that was making the model unstable.

There are three separate towers, one square, one round and one star-shaped with a number of cutouts to check the print accuracy at different temperatures.

  1. I exported from Blender as an STL
  2. I imported into Cura, retained the existing settings and exported the GCode file
  3. I opened the GCode file in Repetier to identify layer heights
  4. I manually modified the GCode file to specific temperatures within the file itself so the 3D printer would adjust the temperatures automatically
  5. I saved the modified GCode file to the memory stick and transferred to the Artillery Sidewinder X1 3D printer for printing

The end result is a more structurally sound tower that did successfully remain standing during printing – however – the stringing effect is consistent across all temperatures and is an issue throughout the height of the tower.

  1. What did I learn from this test?
  2. Making the model simpler ensured it could be printed without falling over

The stringing issue must be a consistent problem within the settings of the print profile in Cura – perhaps related to retraction settings?

I will research further and re-test as a third attempt.

Project files available from here:

Thank you for watching.

Rob @ 3DModUK

3D Printing Artillery Sidewinder X1 3D Printer Blender General

PLA Temperature Test – First Attempt = Failure

In my previous ‘Overhang Test’ on the Artillery Sidewinder X1 I noticed the print was ‘stringy’. I tried adding retraction and this didn’t work so I wondered if this was something to do with print temperature and the best way of checking this is to come up with another test.

In this video I create a ‘Temperature Tower’ in blender so I can test different print temperatures at different levels of the tower.

And, in order to test as many things in one go I come up with an elaborate – perhaps too elaborate – triple tower with aspects such as cut-outs and overhangs.

This however was to be my downfall, or should I say the models downfall!

  1. Create the model in blender
  2. Export the model as an STL file
  3. Load the STL file into Cura and export the GCode file
  4. Load the GCode file into Repetier and identify the layers for the appropriate temperature changes
  5. Modify the GCode file and set specific temperatures at the specific levels of the tower print
  6. Copy the GCode file to the printer
  7. Print using ICE Filaments ‘Romantic Red’ filament

What did I learn from this project?

  1. The model was too complicated and I should have just kept it simple.
  2. Supports aren’t only required to ensure that anything overhanging can print, they can be also present to stabilise the model whilst printing while the plastic is still hot and malleable until cooled.

These tests not only help me learn about the Artillery Sidewinder X1 3D printer, but also the software, print settings and the approach to getting the best out of the 3D prints.

Taking this into account, I am sure my next test will be more successful.

If you would like to see original blender model, STL or GCode files you can access them here:

Thank you for watching.

Rob @ 3DModUK